📚 Guide by Safety Mom · Allstar Enviro Safety — The Caught In Between Hazards In Construction Environments is an online workplace safety course delivered by Safety Mom · Allstar Enviro Safety, Calgary’s Energy Safety Canada Authorized Training Provider. Self-paced, mobile-friendly, same-day certificate upon exam completion. Available across Canada.
🔗 Related Safety Mom courses & guides: Fall Protection Calgary · Ground Disturbance · Oil Sands Safety Certs · Instructor: Arliss Levine, CRSP, CHSC
COURSE OVERVIEW
This online Caught-In/Between Hazards in Construction Environments provides the information employees need to recognize the caught-in/between hazards that are associated with construction tasks and avoid them before accidents happen. Caught-in/between accidents occur when a person is squeezed, caught, crushed, pinched or compressed between two or more objects. They are one of the four top causes of fatalities in construction work, and can result in serious injuries as well. Topics covered in this program include the three major types of caught-in/between hazards; vehicles and heavy equipment; powered tools and machinery; and more. Using a powerful combination of audio, full-motion video, text and colorful graphics, this course provides the most cost-effective safety and regulatory compliance training available today. The course is divided into a number of logical sections so information is easily understood… and retained.
COURSE TOPICS
This online Caught-In/Between Hazards in Construction Environments course covers the following topics:
- What are caught-in/between hazards
- The three major types of caught-in/between hazards
- Trenching, scaffolding and demolition
- Vehicles and heavy equipment
- Powered tools and machinery
- And more
ONLINE COURSE DURATION
Approximately 45 minutes
PASS MARK
Testing conducted throughout this online course is designed to reinforce the information presented. A mark of 80% must be achieved in order to pass this course. The course is able to be taken three times in efforts to achieve the pass mark. Printable resources are available in the form of a comprehensive student manual. The manual is a valuable resource for future use and knowledge retention.
CERTIFICATE OF COMPLETION
Upon successful completion of this online course, a certificate of completion will be available for download and printing.
COURSE PREVIEW
Additional Safety Knowledge
Alberta Construction Safety Framework
Alberta construction is governed by the Occupational Health and Safety Act, OHS Regulation, and OHS Code. Prime contractors on construction sites of 20+ workers must have a written health and safety program including hazard assessments, safe work practices, training records, incident investigation procedures, and joint health and safety committee (JHSC) provisions. The prime contractor coordinates safety across all sub-trades.
The Four Leading Causes of Construction Fatalities
- Falls from height: 33–39% of construction fatalities. Prevention: fall protection systems, guardrails, safe access.
- Struck-by objects: 10–12% of fatalities. Prevention: exclusion zones, tool tethering, hard hats, load path awareness.
- Electrocutions: 8–10% of fatalities. Prevention: lockout-tagout, overhead line clearance (7 metres minimum in Alberta for lines up to 750V), GFCIs.
- Caught-in/between: 5–8% of fatalities. Prevention: trench shoring, machine guarding, energy control procedures.
These are known as OSHA’s “Focus Four” and are the target of workplace safety programs across Canada and the US.
Pre-Work Hazard Assessment
Every task must begin with a documented hazard assessment. Workers identify hazards, evaluate risk (probability × severity), and implement controls following the hierarchy: elimination, substitution, engineering controls, administrative controls, PPE. Alberta OHS requires a formal hazard assessment for all work, and a Job Safety Analysis (JSA) or Field Level Hazard Assessment (FLHA) for non-routine tasks. Workers have the legal right to refuse unsafe work under Section 31 of the OHS Act.
Caught In Between Hazards In Construction Environments — Personal Protective Equipment
Construction PPE minimum standards in Alberta: CSA Grade 1 hard hat, CSA Grade 1 safety footwear (green triangle), CSA-approved safety eyewear, and high-visibility apparel meeting CSA Z96 Class 2 or 3 for roadside work. Additional task-specific PPE (respirators, hearing protection, cut-resistant gloves, fall arrest harnesses) is required based on hazard assessment. PPE is the last line of defence, not the first control.
Content reviewed by Arliss Levine, CRSP, CHSC — lead safety instructor at Safety Mom · Allstar Enviro Safety Calgary, an Energy Safety Canada Authorized Training Provider.
