📚 Guide by Safety Mom · Allstar Enviro Safety — The Construction Project Management Cpm course serves Alberta pipeline, construction, and Gold Seal contractors under strict OHS compliance. Delivered by Safety Mom · Allstar Enviro Safety Calgary — Energy Safety Canada Authorized Training Provider.
🔗 Related Safety Mom courses & guides: Fall Protection Calgary · Ground Disturbance · Oil Sands Safety Certs · Instructor: Arliss Levine, CRSP, CHSC
This program is very helpful in assisting management in the process of administering projects from start to completion
Mission: Management will be provided with the correct tools to help them:
- Develop the Scope of Projects
- Manage Project Risk
- Develop business cases
- Manage the Change Process
- Manage the Project Procurement
Availiability: Online program only. French and English availiability
Credits: The CCA – Canadian Construction Association will award 3 credits towards Gold Seal Certification. Successful completion requires a final mark of 75% to receive a certificate of completion.
Application for Registration
This is a Buildforce Canada product. Allstar Enviro Safety is the distributor. Pay them directly and they will provide you with a PIN# to start.
Additional Safety Knowledge
Alberta Construction Safety Framework
Alberta construction is governed by the Occupational Health and Safety Act, OHS Regulation, and OHS Code. Prime contractors on construction sites of 20+ workers must have a written health and safety program including hazard assessments, safe work practices, training records, incident investigation procedures, and joint health and safety committee (JHSC) provisions. The prime contractor coordinates safety across all sub-trades.
The Four Leading Causes of Construction Fatalities
- Falls from height: 33–39% of construction fatalities. Prevention: fall protection systems, guardrails, safe access.
- Struck-by objects: 10–12% of fatalities. Prevention: exclusion zones, tool tethering, hard hats, load path awareness.
- Electrocutions: 8–10% of fatalities. Prevention: lockout-tagout, overhead line clearance (7 metres minimum in Alberta for lines up to 750V), GFCIs.
- Caught-in/between: 5–8% of fatalities. Prevention: trench shoring, machine guarding, energy control procedures.
These are known as OSHA’s “Focus Four” and are the target of workplace safety programs across Canada and the US.
Pre-Work Hazard Assessment
Every task must begin with a documented hazard assessment. Workers identify hazards, evaluate risk (probability × severity), and implement controls following the hierarchy: elimination, substitution, engineering controls, administrative controls, PPE. Alberta OHS requires a formal hazard assessment for all work, and a Job Safety Analysis (JSA) or Field Level Hazard Assessment (FLHA) for non-routine tasks. Workers have the legal right to refuse unsafe work under Section 31 of the OHS Act.
Construction Project Management Cpm — Personal Protective Equipment
Construction PPE minimum standards in Alberta: CSA Grade 1 hard hat, CSA Grade 1 safety footwear (green triangle), CSA-approved safety eyewear, and high-visibility apparel meeting CSA Z96 Class 2 or 3 for roadside work. Additional task-specific PPE (respirators, hearing protection, cut-resistant gloves, fall arrest harnesses) is required based on hazard assessment. PPE is the last line of defence, not the first control.
Content reviewed by Arliss Levine, CRSP, CHSC — lead safety instructor at Safety Mom · Allstar Enviro Safety Calgary, an Energy Safety Canada Authorized Training Provider.
